Label printer help
Godex
We recommend the GoDEX ZX420i
For specs on the GoDEX zx420i please click Here
To view the manual on the GoDEX zx420i, please click Here
To learn how to set up the GoDEX label printer, please click here
Zebra
If you have the Zebra ZT230 thermal printer, here are links to some commonly asked questions.
Unpacking and setting up your Zebra ZT230
Https://Supportcommunity.Zebra.Com/S/Article/ZT210-ZT220-ZT230-Quick-Start-Guide?Language=En_US
Download the printer driver
Windows: Https://Www.Zebra.Com/Ap/En/Support-Downloads/Printers/Industrial/Zt230.Html
Click this link above, click Drivers, then select the driver which suits your hardware). Click the download button, click accept and begin download, then install the driver.
Replacing Ribbon or Labels on Zebra ZT230
Https://Www.Zebra.Com/Ap/En/Support-Downloads/Printers/Industrial/Zt230.Html#Dynamicvideolist_40e
Zebra ZT230 Printer support
Https://Www.Zebra.Com/Ap/En/Support-Downloads/Printers/Industrial/Zt230.Html#Dynamicvideolist_40e
If printing is uneven colour on one side:
For all other support, please go directly to Zebra Https://Www.Zebra.Com/Ap/En/About-Zebra/Contact-Zebra.Html, or to your supplier.
Where to buy consumables
To learn more about how and where to obtain labels and thermal ribbons, click here
Troubleshooting
Here's how to set up the guides in your label printer
Printer just not working?
Twizel found that there was a lever inside the machine (Zebra) that needed to be flipped back into place more fully. It looked right but wasn’t.
With a red light showing on the Zebra printer:
Your printer is likely giving a red error light because the print head is not latched completely. Ensure the print head is in the correct position and latched completely. To do this, open the cover and press down firmly on the print head until you hear two distinct clicks.