How to use and fold labels

Our suggestions:

• When the labels come out the printer in a continuous flow, they will stop at the end of the print job, neatly on the perforation and be able to tear off nicely at the printer end.
• To separate each individual label - there is a black line on the back… fold the labels slightly, then tear them apart at this point. We found that doing a quick fold first really helped the neatness of the separation.
• Do the same at the point the 2 small name labels join the main label. Note there is no black line on the back at this point. But they will still tear the same.
• Use those 2 small named labels for eg: helmets and bikes, as you require.
• Then for the main long label, thread the label around the bag handle, remove the backing paper that has a cut line at approx 10cm from one end.
• Carefully align the two ends of the label (one without the backing paper - so its sticky), and carefully smooth these two ends together.
• Done! :-)